Truck Canopy or Trailer Slimline II Rack Kit / 1165mm(W) X 1560mm(L) - by Front Runner
THE SLIMLINE II IS MODULAR.? The Slimline II offers complete roof rack design flexibility. No other roof rack available today can be assembled by the customer to meet their specific needs.
THE SLIMLINE II IS LOW PROFILE. Because of the unique T-slot mounting system, “basket style” side rails are not necessary. This flat deck design is unobtrusive and compliments the lines of today’s automobiles. Because there are no side rails, it’s easier and quicker to remove stored gear and it’s also possible to mount a roof top tent.
THE SLIMLINE II IS DURABLE.? A roof rack should last as long as your vehicle. Most roof racks available today will rust, chip, and/or crack after being exposed to the elements. The Front Runner Slimline II Roof Rack will take the abuse of the sun, the rain, the gear, as well as whatever condition road you drive on.
The Slimline II tray is manufactured in South Africa entirely with corrosion free aluminum while the mounting solutions are either all aluminum or stainless steel -- ensuring a lifetime of dependability.
THE SLIMLINE II IS VERSATILE.?? The Slimline II offers easy on and off mounting for any type of adventure gear. No more untying, unstrapping, un-netting the entire contents of your roof rack to remove one item. The t-slot slats and slotted side rails offer complete mounting flexibility. Loads are independently secured anywhere on the top, sides, or bottom of the rack using Front Runner’s unique bolt on system.
3 x FASS001 - Foot 40mm (Pair)
1 x FITT002 - Fitting Instruction - Kit Vehicle Specific
2 x RRAC021 - Between slat foot adapter (Pair) 3CR12 SST
1 x RRSTA08 - Slimline II Tray - 1165mm(W) x 1560mm(L) x 50mm(H)
1 x TRAC002 - Universal Tracks 1400mm (Pair)
Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel
Approximate Installed Weight 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Weight 30.3kg (66.7lbs)
YOU MIGHT LIKE THESE
This kit creates a full size rack that sits above your Ford F Series' truck bed.This Slimline II rack kit contains th...Ford F150 F250 F350 Pick-Up Truck (1997-Current) Slimline II Load Bed Rack Kit - by Front Runner $914.00
This is a universal unit that is ideally suited for fitting into station wagon vehicles, as it is the only unit which...
This Load Bar Kit contains a pair of 1475mm wide Front Runner Load Bars, 2 pairs of Front Runner Load Bed Legs, and a...
This Slimline II rack kit contains the Slimline II tray (1255mm x 1964mm), (2) Front Runner custom vehicle specific F...