Mercedes-Benz G-Class Shock Absorbers Kit RAID by KONI

The 90 Series HT RAID shocks are single adjustable shocks both front and rear in rebound damping only. The RAID dampers are specifically designed for improved ride and handling characters, and are larger in diameter compared to the industry standard replacement dampers. This helps with heat dissipation in occasional off-road use. According to KONI, the 90 Series RAID shocks will fit vehicles from standard OE ride heights up to 50mm of lift at front and rear. 

FEATURES

• Warranty: Lifetime: https://www.koni-na.com/en-US/NorthAmerica/About/Warranty/
• Retail Price: Wow. These specs (below) at this price (above). Amazing value.
• Fitment: Fits all W461 & W463 trucks, including the G63!
• KONl Special technology, up-sized
• Improved ride/handling
• Rebound-adjustable off-the-vehicle
• Solid, robust attachments welded all around (360°)
• New heat-resistant sealing technology for increased longevity
• Large diameter to help with heat dissipation
• Adjustable: See adjustment procedure: https://www.koni-na.com/en-US/NorthAmerica/Technology/Adjustment-Guides/comp/

SPECS

• Diameter of Body: 70mm
• Shaft Thickness: 18mm
• Extended vs. Compressed Lengths
• Front: 635mm extended and 392mm
• Rear: 582mm and 370mm

NOTE: KONI states officially that these fit on lifts up to 50mm. The compressed and extended lengths are similar to those of King Shocks at front and rear:

Front: 644mm to 402mm
Rear: 609mm to 397mm

There's virtually no difference in their respective travels at front and rear. Based on these specs, and Viking's experience with the Kings off road for a good fit and travel couple with its THOR Springs (70mm lift at front and 50mm lift at rear), the KONI RAIDS are likely a good fit with THOR Springs.

NOTE: The THOR lift numbers are approximations and you may experience some minor differences in height and results, depending on your model (with its respective engine) and the gear/equipment/people that are on your vehicle.