ARB Intensity LED Lights
Many ARB customers prefer a combination of a spot and a spread driving light due to the various driving conditions encountered in general off-roading. Most LED light bars on the market are considered great lights for slower off-road driving where the ability to see great distances is not so critical. For ARB's new light to compete with the best the market can offer in Halogen and HID lighting, it needed to give not only the broad flood beam associtated with light bars but also a spot beam with the ability to penetrate longer distances.
ARB Intensity LED Series Lights:
- AR21F: 7" Flood Light
- AR21S: 7" Spotl Lght
- AR32F: 9" Flood Light
- AR32S: 9" Spot Lght
- Existing wire harness or optional ARB harness part number 3500520 required for installation.
- Submersible up to 9.5 ft. 3 M
- High pressure cast A360 aluminium body.
- Unbreakable polycarbonate lens.
- UV stable moulded polycarbonate lens cover.
- Multiple position stainless steel mount.
- Durable UV Stable polyester powdercoat
- Gore breather.
- IP68 Certified.
- Deutsch DT-06 waterproof connectors.
- MIL810-STDG vibration certified
- RoHS compliant.
- 10-36 V DC input.
- 90 Watts.
- Amp draw 6.25A @ 14.4V.
- 32 LEDs.
- 9300 raw Lumens.
- Color temperature: 6500 Kelvin
- Lux @ 10m (33Ft) – 2250 (spot) 770 (flood).
- 20° full width flood.
- 10° full width spot.
- Over/under voltage protection.
- 50,000+ Hour LED life span.
- Zero UV emissions .
- Operating temp: -40°F to +145°F
- Protected against RFI/EMC interference.
- Integrated thermal management.
- Weight: AR21 - 2.5Kg / 5.5Lb. AR32 - 3.1Kg / 6.8Lb complete.
- Made in the USA
The AR21 Intensity LED driving lights set a new benchmark for on-vehicle performance lighting upgrades and offer owners convenience and flexibility, packaged within a compact assembly.
After the success of the highly regarded AR32 Intensity LED lights, the AR21 has been developed to provide the growing LED driving light market with a lighting option suited to smaller bull bars or areas where space may be limited.
Utilizing 21 highly efficient Osram LEDs, situated within a patented reflector design, the AR21 produces a light output of 6,950 raw lumens at 6,500 Kelvin, delivering the closest possible colour to daylight, resulting in reduced fatigue for the driver.
A near unbreakable polycarbonate lens shields the optics from road debris and impacts, while a moulded polycarbonate lens cover provides additional scratch and damage protection.
The electronics are contained within a corrosion resistant, pressure cast and IP68 rated aluminium housing that allows submersion beyond 3 metres. The housing is finished in a textured polyester powder coat for further corrosion resistance and aesthetic appeal.
Cooling fins cast directly into the rear of the housing act as a heat sink, resulting in an increase in surface area of more than 200%. This draws away damaging heat and enables the light to operate at peak efficiency in all temperatures.
Advanced reflector and lens optics control the light emitted from the LEDs with 93% efficiency.
The reflector projection patterns are available in either a 20° spot or 10° flood beam, providing users with a beam that best suits their driving style and environment.
To deter theft, each light incorporates tamper proof TORX security fasteners
YOU MIGHT LIKE THESE
With the introduction of the new ARB Intensity LED driving lights and their use of Deutsch waterproof connectors, ARB...
The ARB X-Jack is the only really stable jack for uneven surfaces like the rocky area pictured. The air jack is...ARB X-Jack Air Jack $254.95
Baja Designs OnX6 40" light bar fits perfectly on the G-wagen Front Runner Roof Rack with tall legz as shown. T...Baja Designs - OnX6 $1,399.95
This12/24V wiring loom is designed specifically to work with the new ARB Fridge Freezers. It is much better to wire t...ARB Fridge Wiring Harness $43.59